|
If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
Datasheet File OCR Text: |
Micrel, Inc. 3.3V, DUAL DIFFERENTIAL LVPECL-TO-LVTTL TRANSLATOR Precision Edge(R) SY10ELT23L Precision Edge(R) SY100ELT23L SY10ELT23L SY100ELT23L FEATURES s s s s s s s 3.3V power supply 2.0ns typical propagation delay <500ps typical output-to-output skew Differential LVPECL inputs 24mA LVTTL outputs Flow-through pinouts Available in 8-pin SOIC package Precision Edge(R) DESCRIPTION The SY10/100ELT23L are dual differential LVPECLto-LVTTL translators with +3.3V power supply. Because LVPECL (Low Voltage Positive ECL) levels are used, only +3.3V and ground are required. The small outline 8pin SOIC package and the low skew, dual gate design of the ELT23L makes it ideal for applications which require the translation of a clock and a data signal. The ELT23L is available in both ECL standards: the 10ELT is compatible with positive ECL 10H logic levels, while the 100ELT is compatible with positive ECL 100K logic levels. PIN NAMES Pin Qn Dn VCC GND Function LVTTL Outputs Differential LVPECL Inputs +3.3V Supply Ground TRUTH TABLE D L H Open /D H L Open Q L H L Precision Edge is a registered trademark of Micrel, Inc. M9999-031306 hbwhelp@micrel.com or (408) 955-1690 Rev.: J Amendment: /1 March 2006 1 Issue Date: Micrel, Inc. Precision Edge(R) SY10ELT23L SY100ELT23L PACKAGE/ORDERING INFORMATION(1) Package Type Z8-1 Z8-1 Z8-1 Z8-1 Z8-1 Z8-1 Z8-1 Z8-1 Z8-1 Z8-1 Z8-1 Z8-1 Operating Range Commercial Commercial Commercial Commercial Industrial Industrial Industrial Industrial Industrial Industrial Industrial Industrial Package Marking HEL23L HEL23L XEL23L XEL23L HEL23L HEL23L XEL23L XEL23L HEL23L with Pb-Free bar-line indicator HEL23L with Pb-Free bar-line indicator XEL23L with Pb-Free bar-line indicator XEL23L with Pb-Free bar-line indicator Lead Finish Sn-Pb Sn-Pb Sn-Pb Sn-Pb Sn-Pb Sn-Pb Sn-Pb Sn-Pb Pb-Free NiPdAu Pb-Free NiPdAu Pb-Free NiPdAu Pb-Free NiPdAu Part Number D0 /D0 /D1 D1 1 2 LVPECL LVTTL 8 VCC 7 Q0 6 Q1 5 GND SY10ELT23LZC SY10ELT23LZCTR(2) SY100ELT23LZC SY100ELT23LZCTR(2) SY10ELT23LZI SY10ELT23LZITR(2) SY100ELT23LZI SY100ELT23LZITR(2) SY10ELT23LZG(3) SY10ELT23LZGTR(2, 3) SY100ELT23LZG(3) SY100ELT23LZGTR(2, 3) 3 4 8-Pin SOIC (Z8-1) Notes: 1. Contact factory for die availability. Dice are guaranteed at TA = 25C, DC Electricals only. 2. Tape and Reel. 3. Pb-Free package is recommended for new designs. M9999-031306 hbwhelp@micrel.com or (408) 955-1690 2 Micrel, Inc. Precision Edge(R) SY10ELT23L SY100ELT23L ABSOLUTE MAXIMUM RATINGS(1) Symbol VCC VIN VOUT IOUT TLEAD TS TA Notes: 1. Permanent device damage may occur if absolute maximum ratings are exceeded. This is a stress rating only and functional operation is not implied at conditions other than those detailed in the operational sections of this data sheet. Exposure to absolute maximum ratlng conditions for extended periods may affect device reliability. Rating Power Supply Voltage PECL Input Voltage Voltage Applied to Output at HIGH State Current Applied to Output at LOW State Lead Temperature (soldering, 20sec.) Storage Temperature Operating Temperature Range Value -0.5 to +3.8 0 to VCC+0.5 -0.5 to VCC Twice the Rated IOL +260 -65 to +150 -40 to +85 Unit V V V mA C C C LVTTL DC ELECTRICAL CHARACTERISTICS VCC = +3.3V 5%. TA = -40C Symbol VOH VOL ICC IOS Parameter Output HIGH Voltage Output LOW Voltage Power Supply Current Output Short-Circuit Current Min. 2.0 -- -- -80 Max. -- 0.5 30 -240 TA = 0C Min. 2.0 -- -- -80 Max. -- 0.5 30 -240 TA = +25C Min. 2.0 -- -- -80 Max. -- 0.5 30 -240 TA = +85C Min. 2.0 -- -- -80 Max. -- 0.5 30 -240 Unit V V mA mA VOUT = 0V Condition IOH = -3.0mA IOL = 24mA LVPECL DC ELECTRICAL CHARACTERISTICS VCC = +3.3V 5%. TA = -40C Symbol IIH IIL VCMR VPP VIH Parameter Input HIGH Current Input LOW Current Common Mode Range Minimum Peak-to-Peak Input(1) Input HIGH Voltage(2) 10ELT 100ELT Input LOW Voltage(2) 10ELT 100ELT Min. -- 0.5 1.5 200 Typ. -- -- -- -- Max. 150 -- VCC -- Min. -- 0.5 1.5 200 TA = 0C Typ. -- -- -- -- Max. 150 -- VCC -- -- 0.5 1.5 200 TA = +25C Min. Typ. -- -- -- -- Max. 150 -- VCC -- -- 0.5 1.5 200 TA = +85C Min. Typ. -- -- -- -- Max. 150 -- VCC -- Unit A A V mV mV 2070 2135 1350 1490 -- -- -- -- 2410 2420 1800 1825 2130 2135 1350 1490 -- -- -- -- 2460 2420 1820 1825 2170 2135 1350 1490 -- -- -- -- 2490 2420 1820 1825 2130 2135 1350 1490 -- -- -- -- 2565 2420 mV 1820 1825 VIL Notes: 1. 200mV input guaranteed full logic at output. 2. These values are fro VCC = 3.3V. Level specification will vary 1:1 with VCC. M9999-031306 hbwhelp@micrel.com or (408) 955-1690 3 Micrel, Inc. Precision Edge(R) SY10ELT23L SY100ELT23L AC ELECTRICAL CHARACTERISTICS VCC = +3.3V 5%. TA = -40C Symbol fMAX tPD tskpp tSKEW++ tSKEW- tr, tf Parameter Maximum Input Frequency(1, 2) Min. 160 1.5 -- -- -- 0.5 Max. -- 2.5 0.5 0.3 0.3 1.0 TA = 0C Min. 160 1.5 -- -- -- 0.5 Max. -- 2.5 0.5 0.3 0.3 1.0 TA = +25C Min. 160 1.5 -- -- -- 0.5 Max. -- 2.5 0.5 0.3 0.3 1.0 TA = +85C Min. 160 1.5 -- -- -- 0.5 Max. -- 2.5 0.5 0.3 0.3 1.0 Unit MHz ns ns ns ns ns Condition CL = 20pF CL = 20pF CL = 20pF CL = 20pF CL = 20pF CL = 20pF Propagation Delay Part-to-Part Skew(3, 6) Skew(4, 6) Skew(5, 6) Within-Device Within-Device Output Rise/Fall Times 1.0V to 2.0V Notes: 1. Frequency at which output levels will meet a 0.8V to 2.0V minimum swing. 2. The fMAX value is specified as the minimum guaranteed maximum frequency. Actual operational maximum frequency may be greater. 3. Device-to-Device skew considering HIGH-to-HIGH transitions at common VCC level. 4. Within-device skew considering HIGH-to-HIGH transitions at common VCC level. 5. Within-device skew considering LOW-to-LOW transitions at common VCC level. 6. All skew parameters are guaranteed, but not tested. M9999-031306 hbwhelp@micrel.com or (408) 955-1690 4 Micrel, Inc. Precision Edge(R) SY10ELT23L SY100ELT23L 8-PIN SOIC .300" WIDE (Z8-1) Rev. 03 MICREL, INC. 2180 FORTUNE DRIVE SAN JOSE, CA 95131 TEL USA + 1 (408) 944-0800 FAX + 1 (408) 474-1000 WEB http://www.micrel.com The information furnished by Micrel in this datasheet is believed to be accurate and reliable. However, no responsibility is assumed by Micrel for its use. Micrel reserves the right to change circuitry and specifications at any time without notification to the customer. Micrel Products are not designed or authorized for use as components in life support appliances, devices or systems where malfunction of a product can reasonably be expected to result in personal injury. Life support devices or systems are devices or systems that (a) are intended for surgical implant into the body or (b) support or sustain life, and whose failure to perform can be reasonably expected to result in a significant injury to the user. A Purchaser's use or sale of Micrel Products for use in life support appliances, devices or systems is at Purchaser's own risk and Purchaser agrees to fully indemnify Micrel for any damages resulting from such use or sale. (c) 2006 Micrel, Incorporated. M9999-031306 hbwhelp@micrel.com or (408) 955-1690 5 |
Price & Availability of SY100ELT23LZI |
|
|
All Rights Reserved © IC-ON-LINE 2003 - 2022 |
[Add Bookmark] [Contact Us] [Link exchange] [Privacy policy] |
Mirror Sites : [www.datasheet.hk]
[www.maxim4u.com] [www.ic-on-line.cn]
[www.ic-on-line.com] [www.ic-on-line.net]
[www.alldatasheet.com.cn]
[www.gdcy.com]
[www.gdcy.net] |